Dayton Ohio Bathtub Refinishing

M.B. Link Refinishing is Dayton’s Bathtub Refinishing professional’s choice of thousands of homeowners and property managers. Bathtub refinishing & resurfacing is the most affordable alternative to replacing your bathtub. Refinishing will save you time, money, and a bunch of headaches! Don’t Replace it, Reglaze It!

Schedule Today

Bathtub Reglazing & Resurfacing

The actual bathtub resurfacing process only takes a few hours. Usually a standard sized bathtub takes approximately 3 to 4 hours to refinish plus a 24-hour drying period. The entire process is done on site. This means the bathtub is not removed from its place so there is no dust or huge piles of trash waiting to be removed from your home. Bathtub refinishing or resurfacing is also very inexpensive compared to tearing out and replacing your tub. It costs a fraction of what a bathtub replacement would cost. Many customers will save up to 70% of the cost of replacing their tub by refinishing it instead.

Bathtub Refinishing Dayton Ohio experts can refinish all kinds of tubs with our proven bathtub refinishing method. If you have a porcelain, metal, cast iron, acrylic, fiberglass, or cultured marble bathtub it can be refinished!

Our Film Hardness is a fully-linked Aliphatic Acrylic Urethane that is widely used throughout the world for aerospace, maritime and industrial uses where super-tough protection is needed. We have 4H-pencil hardness and it is the most resilient and durable coating that is used by MB Link Refinishing of Dayton Bathtub Refinishing. Our resin rich “wear layer” formula as it is curing the pigment settles to the bottom of the film, and a clear resin rich layer forms on top. What you will see is a deep, rich gloss (95+) is actually a “wear layer” that provides the long-term protection of the gloss and color that is associated with premium quality urethanes.   This “wear layer” is a barrier to all forms of punishment from caustic acids, abrasives and solvents in cosmetics, dyes etc. that are known to stain, destroy, or limit the lifespan of most refinishing products used on the market today.

[baie_before_after_image src_before=”https://mblink.net/wp-content/uploads/2019/11/Before.jpg” src_after=”https://mblink.net/wp-content/uploads/2019/11/After.jpg” align=”right” _builder_version=”4.0.6″ _i=”1″ _address=”3.0.1.1″ /][baie_before_after_image src_before=”https://mblink.net/wp-content/uploads/2019/11/Before-3.jpg” src_after=”https://mblink.net/wp-content/uploads/2019/11/After-3.jpg” align=”right” _builder_version=”4.0.6″ _i=”2″ _address=”3.0.1.2″ /]

Don’t Replace it, Reglaze It!

Whether you have an ugly tub or out dated countertops we can help. You don’t need to look any further for that miracle method or a royal finish you have come to the right company.  We only use the best re-glazing materials manufactured. Hawk and Midwest are the only brands that are proven to last in bathtub resurfacing or countertop resurfacing. Other top refinishing companies use these as well but we give you what you pay for 11-13 mils of wet product that dries to 7-9 mils giving you the toughest longest lasting finish. We apply 2 coats of primer and 3 coats of topcoat. The most critical difference between high and low performance coatings is the actual number of chemical bonds holding the molecules together. The higher the cross-link density, the higher levels for overall film durability and life span. Our products use a fully-linked system, it delivers the most long term value to your refinished product, as compared to other coatings such as low link urethanes, polyesters, epoxies, or enamels available today.

    (937) 429-0698

    Call Us Today and Get a Quote

    Got A Question?

    Drop us a line & we'll get right back to you.